Hi.
Multi VirAnalyzer 3.12.0.1 English Version
1. Oscilloscope/Spectrum Analyzer(Simplified) -> "Reference" button does not work.
2. Data Recorder -> The selection of the probe divider does not work.
I suggest add to the Multi VirAnalyzer to auto-calibration of zero offset and autocorrect amplitude. Look at how it is done in the program HScope for Android.
Would it be possible in "Spectrum Analyzer" to add the scale in Volt and dBmV and dBV to "Reference value"? In addition, the correct value is not displayed on the effective voltage measurements for a square wave.
In "spectrum analyzer" the vertical scale would be
convenient to read the Volts. In the oscilloscope
screen the trms and average voltage in volt values
of the measurements are not exact.
In "spectrum analyzer" the vertical scale would be
convenient to read the Volts. In the oscilloscope
screen the trms and average voltage in volt values
of the measurements are not exact.
3.12.6.0 with Windows 10 21H1, professional oscilloscope opens and then immediately crashes and closes.
Tried on two different PCs with same results.
3.11.2.1 works perfectly
Post time 2021-4-4 16:53:27
Author
